萬向聯軸器采用十字軸承聯接兩端聯接法蘭，可以傳遞完全不在同一軸線的扭矩，對角向的補償可達25?以上，采用花鍵聯接可以大距離地補償軸向位移。萬向軸承載能力高，傳動效率優異，在現代工業領域被廣泛采用。

SWP十字萬向聯軸器采用剖分式叉頭布局，與SWC十字萬向聯軸器使用的場合相近，主要運用在重載大型裝備領域，回轉直徑可達1200mm。

SWC十字萬向聯軸器采用整體式叉頭布局，主要用于軋鋼機械，起重運輸機械等其他重型裝備領域，回轉直徑可到1600mm，扭矩傳遞距離可達30m以上，是運用相當廣泛的萬向聯軸器。

萬向節聯軸器的不同軸可能是徑向位移，傾斜或兩者兼而有之。測量同軸度應在十字軸萬向聯軸器端面和圓周上均勻分布的四個位置進行。十字軸式萬向聯軸器聯接的機泵在安裝過程中都不可避免地要進行同軸度的調整，使對輪既同心又平行，否則將影響機泵使用效率或造成設備運行事故。

For nearly 30 years, Rokee has always adhered to the road of innovation. Using our full understanding of this unique product and years of manufacturing experience, we have continuously optimized the design and manufacture of our Universal Joint Shaft products to supply various industrial fields with our Cost-effective and high-performance products. Our products are widely used and have many impressive records. From micro Universal Shafts for modern logistics, artificial intelligence machinery, light products used in the paper industry, high speed and high performance products for engineering and railway vehicles, to super heavy duty products used in metallurgical rolling system systems, Rokee has won us with mature products and quality Long-term trust of customers, widely exported to Europe, America and other parts of the world.

We have 4 series of nearly 100 standard models and various extended design Universal Joint Couplings based on this for our customers to choose, Torque from *** to ***, diameter from 58mm to 1200mm, ranging from light products to super heavy-duty products, the service field covers almost all transmission occasions. All standard products of Rokee are optimized design products based on the combination of decades of experience and computer design technology. The Universal Couplings we are proud of are not only different from the national technical standards of China but also the standards of other manufacturers in the world. Unique design ideas and make perfection more perfect sprit drive our products find a better balance between lower price and rotational and transmission torque performance. Rokee's standardized products also mean faster delivery and easier spare parts availability as well as quick maintenance service. The cardan shaft products used in important equipment and core industrial fields have not only undergone careful design, but also comprehensive torque, stiffness, balance performance and life tests.

對輪聯軸器慣性主軸線與旋轉軸線之間重心位置偏心量的可能值是平方和方根值而決定的，主要由兩半聯軸器和聯接螺栓組成，對輪聯軸器軸套孔裝配前，鏜削切割和鍵槽的修整聯軸器端面和其它表面的加工等。半聯軸器的軸套孔有圓錐孔和圓柱孔兩種形式，圓錐孔比圓柱孔在工藝特性上有較多的特點，圓錐形軸套孔容易獲得相配合部件之間的同心。

對輪聯軸器在工作過程中，并且會帶來燃油消耗空氣污染等后果，由于承受咬入沖擊動載荷，使得聯軸器受到峰值轉矩，聯軸器承載能力下降，并在短時間內失效，從而直接影響其正常工作，其中的較薄弱環節進行替換或維修是重要和實用的。聯軸器兩軸相對半徑變位要求較好，找耦合同心度為0.2~0.6mm，存在很大困難。如果在駕駛過程中螺栓松動，泵裝置的振動和噪音可能會變大。